Like the title say's. I'm looking for a few simple electrical circuits.
This for a 90% drag car.

1. ignition circuit
2. starter circuit
3. 3 wire charging circuit
4. electric fan, water pump etc. "basicly a opional circuit"

All without the use of the stock 69 Chevelle ignition key switch.
BTW: I do have the factory electrical schematic. But I'm looking for
basic system.
Thank you for taking the time to read me thread.

Does it have to use factory wiring? I would run a 4 gauge wire from the battery to a junction and then run separate wires from that to your switches.

Check with street rod suppliers, they have small wire harnesses as used in T buckets and roadsters with only 10 or 12 total circuits. Usually very inexpensive, around $100 for a whole kit with wiring, fuse box, etc. Good luck, Jim.

Does it have to use factory wiring? I would run a 4 gauge wire from the battery to a junction and then run separate wires from that to your switches.

Nope. The factory wiring is the problem. So I thought I would just delete it and build some circuits.

Check with street rod suppliers, they have small wire harnesses as used in T buckets and roadsters with only 10 or 12 total circuits. Usually very inexpensive, around $100 for a whole kit with wiring, fuse box, etc. Good luck, Jim.

Ok thanks for the tip. I did look at some from Painless. But I'm a little rushed to get this project done. It will take at least 10 days to ship to me.

http://cgi.ebay.com/ebaymotors/10-CIRCUIT-BASIC-WIRE-HARNESS-RAT-STREET-ROD-GEARHEAD_W0QQitemZ140339706647QQcmdZViewItemQQptZM otors_Car_Truck_Parts_Accessories?hash=item20ace5f b17&_trksid=p4506.c0.m245

Will this Painless system run the circuits I'm looking to build for.
For I do have one of these units from Painless.
This is what I would like to run off of it.
1. ignition circuit
2. starter circuit
3. 3 wire charging circuit
4. electric fan "24 amps"
5. Plus a "basically a optional circuit"

http://static.summitracing.com/global/images/prod/large/prf-70207.jpg

http://www.summitracing.com/parts/PRF-70207/

Here is a site that has alot of electrical pieces. :thumbsup:

http://www.wiringproducts.com/index1.html

Maybe you guys didn't understand my question. I'm looking for drawings of circuits. Not parts.
Thanks

When you say drawings, do you mean schematics? Can you read electrical diagrams?
Just trying to clarify what is needed.

Ron

When you say drawings, do you mean schematics? Can you read electrical diagrams?
Just trying to clarify what is needed.

Ron

Yes I can read them, could maybe just go ahead and draw some up.
But if some one has them already and they work. Then I would be interested..
Thanks.

Look on this page,

http://www.wiringdiagrams21.com/search/wiring+diagram+ignition+circuit+91+eagle+talon

and here:
http://www.madelectrical.com/electrical-tech.shtml

and here:
http://www.y9racing.com/Tech/Documents/Wiring%20diagram.jpg

and for a short text book on the subject this one is excellent:
http://www.sideways-technologies.co.uk/forum/Blah.pl?m-1202573084/

Ron

Look on this page,

http://www.wiringdiagrams21.com/search/wiring+diagram+ignition+circuit+91+eagle+talon

and here:
http://www.madelectrical.com/electrical-tech.shtml

and here:
http://www.y9racing.com/Tech/Documents/Wiring%20diagram.jpg

and for a short text book on the subject this one is excellent:
http://www.sideways-technologies.co.uk/forum/Blah.pl?m-1202573084/

Ron

bikeron: The last two links are great. I thank you Sir for taking your time to post this information for me.

Thanks anyways guys. Found what I was looking for.
http://www.americanstreetmasters.com/wiring_101.htm

Thanks anyways guys. Found what I was looking for.
http://www.americanstreetmasters.com/wiring_101.htm

Thanks for posting what you finally came up with!

Like your engine build pics too!

Ron

Thanks for posting what you finally came up with!

Like your engine build pics too!

Ron

Well thank you. :yes:
And your 4 door looks very clean.

Had a 67 4 door. Liked it more that my 2 door 69.
http://i572.photobucket.com/albums/ss168/bigred406/1967_Chevelle.jpg