Source For Trans Crossmember For '72 Chevelle [Archive] - Chevelle Tech

: Source For Trans Crossmember For '72 Chevelle


sn75
Aug 15th, 09, 11:42 AM
Need some assistance fellas. I need a transmission crossmember, preferably a stock one for a TH350 trans. Mine is all jacked up (guy that owned it prior cut it up and it's in bad shape).

Anyway, checked Ground Up, NPD, Eckler, etc and they don't have any. You guys know where I can get one? I'd prefer to not buy an aftermarket one because those are a bit pricey.

Steve

LS7
Aug 15th, 09, 5:15 PM
http://i277.photobucket.com/albums/kk75/ls7chevelle/scan0001-3.jpg

sn75
Aug 15th, 09, 6:15 PM
Thanks!

I also got turned on to another place local to me (well, about 45 minutes away). If they don't have one, I'll call the place in NE.

70ChevelleRagtop
Aug 15th, 09, 9:45 PM
http://i277.photobucket.com/albums/kk75/ls7chevelle/scan0001-3.jpg


I can guarantee you that John will have what you need! :thumbsup:

Finally
Aug 16th, 09, 9:12 AM
Craigslist, Detroit area.

http://detroit.craigslist.org/mcb/pts/1323684297.html

richietables
Aug 16th, 09, 10:56 AM
Does Shiftworks or Bowtie Overdrives sell those?

LS7
Aug 16th, 09, 11:03 AM
I can guarantee you that John will have what you need! :thumbsup:
:yes: Yep, the last one (automatic transmission cross-member) I bought (3 months ago) only cost $40 USD + shipping, also no payment until I received it and was satisfied with it. :cool:

sn75
Aug 16th, 09, 10:43 PM
:yes: Yep, the last one (automatic transmission cross-member) I bought (3 months ago) only cost $40 USD + shipping, also no payment until I received it and was satisfied with it. :cool:

Well, that will be the place I reach out to if the local place I found doesn't come through or charges too much.

greasemonkey427
Aug 17th, 09, 11:05 AM
i have a extra one sitting in my garage

sn75
Aug 25th, 09, 1:04 PM
Got one from Jim Dyer Chevy Classics in Stockton, CA. Great guy and has quite a few parts there. Installed and fits perfect.

I have to snap a picture of the one I took out (from previous owner). It's a hot mess (don't know what he did to it but it's jacked up!).

brans72
Aug 25th, 09, 1:17 PM
I have one powered coated that I am not going to use if your intersted. Brandon