My 69 had 4 wheel disc brakes and its going to be my dd so i got the front disc brakes and am now installing a poly front end kit with new ball joints bushings stabilizer with a new sway bar the only original things im using are the springs and control arms springs are good;) do you think the control arms will hold back on my setup or do you guys think ive got a nice set up
ps im going to be running a 383....

duh 4 wheel drum brakes :D

The stock pieces will work fine with the poly bushings & new sway bar. It will handle much better than with the worn out rubber that was in there before. To complete the package I'd change the rear bushings also.

thanks rick