Attention anyone with global west tall spindle upper control arms. I am ordering a set of custom arms and I need the measurement from the centerline of the shaft perpendicular to it to the center of the ball joint. Thanks for your help.

When Chad build his arms he used a combination of Global West and Hotchkis measurements to come up with 9-5/16" from the shaft out to the balljoint and 1" offset from the shaft centerline. This was for the b-body spindles and used offset upper control arm shafts.

Peter

Thanks. Thats really close to what I have been hearing from other people. Anyone else just to verify?

Here's another option that's a whole lot cheaper:

http://cgi.ebay.com/ebaymotors/ws/eBayISAPI.dll?ViewItem&category=33583&item=7920094752&rd=1&ssPageName=WDVW

Mine actually are coming to a grand total of $98 with shafts and bushings. UB machiune makes them. Any length between likw 11 and 6 inches. No offset but it shouldnt matter too much.