Need linkies to pics of factory correct '70s WITH A/C. Trying to figure out the correct routing and placement of heater hoses and the hot water valve mounted on the passenger side inner fender. Also how the heater hoses are clamped to the alternator bracket with the ac compressor line.

If you do not get a picture, Let me know. The water valve is held on with two 3/16" Pop rivits. May not be on all 70s. mine was a Balt. Car with plastic inners. I used the pop rivits on my new metal inners also.
Bob

There you go!http://i392.photobucket.com/albums/pp10/bbmusclecars427/412.jpg?t=1247865928

If you want to be very anal !!!! In August of 70, I had to take my LS-5 back to the dealer for an A/C recall. The bracket that holds the large low pressure hose to the Pass. side fender. The Dealer moved the bracket up the width of the bracket. WHY ???
It was putting a strain on the crimped fitting and some were cracking. I even redrilled my new NOS fenders, So they looked liked they did in August of 1970. Then again,,,,,,,, Thats just me.
Bob