I'd like to replace the shifter in my '67 Impala. It currently has a 70's Pontiac shifter installed in the factory console. Since the console is in rough shape, I'm going to pull it out and put in an aftermarket floor shifter.
Can anyone recommend a good aftermarket floor shifter? The car has a stock TH400 and is 90% street use.

I guess that sort of depends on your goals, but many of them (B & M, Hurst) will operate in straight gated mode or in ratchet mode. I chose the B & M Quicksilver since I needed a ratchet shifter to operate my TH350 with a full manual valve body.
If the other 10% of your driving will be done at the strip, then a shifter like this might be great for you because in ratchet mode it offers nice control of the shifting, gives you reverse lockout, etc.
Good luck!
Tom

I'm partial to the B&M Megashifter.