I have to change my 66 spindles to 67 or later because of my wilwood disc setup.Is the steering arm also different from 66 to the later years?I want to go with tubular arms and i have seen TRZ Motorsports makes the arms and 2" drop chrome moly spindles.Anyone use them?This is a Drag Race only car at full weight
Dennis
http://www.imagestation.com/picture/sraid115/p8e6d1a6abc44e420a76c0222cfdd3361/f8cb9794.jpg

The 64 to 70 outer tie rod ends are the same and the 71 to 72 tie rod ends are different. This would indicate to me that the steering arms would be the same for 64 to 70.

Peter

Ok then i have to drill out the outside hole in the steering arm then of the one i have to fit the caliper bracket bolt through it.The one wildwood supplies is larger in diameter then the stock one.I found that the 64-66 spindle is different then the 67-72 spindle so i need to go to the later spindle.
Thanks Dennis