Here's somthing you don't see very often for sale 66-7 cowl plenum air intake i don't know if it's GM or repop ad says original GM maybe Mike can chime in if its GM or not.

Here's the link. http://cgi.ebay.com/ebaymotors/66-67-GM-Chevelle-SS396-Z-11-cowl-plenum-Air-Cleaner_W0QQitemZ180369044920QQcmdZViewItemQQptZMo tors_Car_Truck_Parts_Accessories?hash=item29fed535 b8&_trksid=p4506.c0.m245&_trkparms=65%3A12%7C39%3A1%7C72%3A1205%7C240%3A131 8

I can't open ebay links from where I am, but if it's the one I saw recently with Chrome lid... well.... could be a good buy, not a repro from what I recall, but lid would not be Chrome.

Mike

If it is GM, the price seems fair. In the past these things have gone for a lot more!

It's the one with the chrome lid the last one that i seen a couple years ago sold for $3200

The problem is... you can buy a repro which is dead on correct IMO.. and fits very nicely.. for $2000. Buying the GM one, you have to really know that what you are buying is for a 66/67 Chevelle and not a 69 or for a Camaro or Impala, etc.. and you have to be sure that you are getting the duct, plenum, and correct lid, etc.. if you are sure of all that and Repro just won't cut it b/c we are all so accustomed to thinking Repro must be JUNK... ( not the case here, made in USA in NC! ), then, yes, buying this might be a good deal...

Prices are not what they used to be.. but again, it depends on condition and whether it is all there or not.

Worth watching!

QOUTE "The problem is... you can buy a repro which is dead on correct IMO.. and fits very nicely.. for $2000. Buying the GM one, you have to really know that what you are buying is for a 66/67 Chevelle and not a 69 or for a Camaro or Impala, etc.. and you have to be sure that you are getting the duct, plenum, and correct lid, etc..""

Absoultely agree ....been there done that ended up buying two to get one correct unit with all the chevelle parts ..........plus this one does not have the correct GM filter or the factory rope / seal that goes between the firewall and duct ...crappy fit at best ...for that kind of money it should have at least the filter ........quick look tells me this is a correct chevelle base and duct .not lid

Mike .on that lid it appears the GM info usually silk screened on the underside of normal lids is a decal ?? never seen that decal before ?? ..........plus did the correct GM cowl plenum lid have that script on it .....mine does not and it was right out of the box ??

Bill

I remember all you went through to get what you finally got!!

As far as I know and what I have seen over the years.. I don't believe any CP lid should be anything but BLACK, no stickers, no silk screen underneath and no script of any kind...of course I could be wrong.

Did'nt know that these were reproduced in Rutherford College, NC and the bad part is iv'e live here all my life and work just down the road from this place for 16 years. Learn something everyday.

Did'nt know that these were reproduced in Rutherford College, NC and the bad part is iv'e live here all my life and work just down the road from this place for 16 years. Learn something everyday.

The Learnin just never stops at University of Team Chevelle!! :thumbsup:

The Learnin just never stops at University of Team Chevelle!! :thumbsup:
I agree with that :thumbsup::yes: