I am re-doing a rear suspension for my brother's 64 Lemans. All listings show it to be the same as Chevelles for 64.

After tearing it all apart, glassbeading and painting the parts I cant find bushuings for the rear upper control arms. The arms don't appear any different.

I need to get this thing back together, what can I do??? BTW, when I removed the bushings at the rear end side of the uppers, I left the outer shells in because someone had said that the new bushungs used the old outers, but I can't even find a listing for them. As far as the frame side of the uppers, those bushiings were completely removed and are long gone.

Help!

OPGI shows a Moog 6 rubber bushing set for that Pontiac. So if Moog makes them someone should be selling just the uppers.

John, I see that listing, but can't find a listing for the bushings that go on the rear end 'ears'

My Moog catalog has the Tempest and the Chevelle parts the same. 64-77 bushings are same part number.
The Moog rear bushing kit is K5161 (2 bushings) same part for upper or lower.(ex the 64 upper axle ears )
I show the upper axle bushing for 64 was a unique part. Original chevelle part number is 9773067.
My Modern Chevrolet catalog shows a replacement part(using same part number as original) They have last years price as$29.95 ea.
They are a dealer in Winston Salem NC
1-800-722-4828

Hope this helps

Rene
66_Malibu

The 1964 Chevelle rear end (10 bolt) housing upper bushings are smaller in diameter then the 1972 12 bolt housing I put in my car. Dave

64 was a 1 year only on the bushings for the rear end housing. In 65 GM used a larger one. Another 64 only was the adjustable upper arm, which won't fit the 65 - 67 because it will rub on the housing.