I'm thinking about buying a drum-to-disc conversion for my 66' from InLine Tube here in Michigan. Anyone ever deal with them? Was the parts/customer service good? PM me if you don't feel comfortable posting a response here.

Thanks-
Tod

I was just on their site looking at pre-bent brake lines for a conversion master cylinder with built in proportioning valve. I look forward to seeing what people have to say too!

I replaced all the brake lines on my 70 with In-Line Tube. Everything fit perfect. Also, I had them change the 1/4 inch line going to the rear brakes to 3/16 (since I have discs at all four corners) with all the factory bends and protective wire. That worked out excellent. Al (the shop forman) hooked me up with all the reducer fittings I needed. Talk to Al if you can drive there. You cant go wrong, especially if your close enough to drive there like I did.

I'm thinking about buying a drum-to-disc conversion for my 66' from InLine Tube here in Michigan. Anyone ever deal with them? Was the parts/customer service good? PM me if you don't feel comfortable posting a response here.

Thanks-
Tod

I used thier hard line kit and complete rear brake kit (including backing plates) on my 67. I was happy with the product and service.

jim

Hey All,
I purchased a complete brake line kit and a front e brake cable from the pedal to the frame under the car. Great stuff and super people. I will buy from them again.:thumbsup:
Marc:beers:

I replaced all the brake lines on my 70 with In-Line Tube. Everything fit perfect. Also, I had them change the 1/4 inch line going to the rear brakes to 3/16 (since I have discs at all four corners) with all the factory bends and protective wire. That worked out excellent. Al (the shop forman) hooked me up with all the reducer fittings I needed. Talk to Al if you can drive there. You cant go wrong, especially if your close enough to drive there like I did.

Thanks to all! I live about two hours away, so not sure if I'll pick up my parts and save the $88.00 shipping or not. Probably just have the parts shipped at $3.00 a gal. for gas + my time.

Good stuff & good folks! :thumbsup:

I'm sold.

Im in the process of doing a drum to disc conversion right now. I bought it from inline tube because they claim their kit was complete down to every single line. I didnt want to have to fab up and flare my own lines from the master cyl. to the combination valve, etc. So far everything has been perfect. I plan on finishing plumbing all the lines tomorrow so we will see, but so far they are top notch!

Their customer service is top notch. I made many purchases from them. They once sent the wrong line and replaced it in a heart beat.

Im in the process of doing a drum to disc conversion right now. I bought it from inline tube because they claim their kit was complete down to every single line. I didnt want to have to fab up and flare my own lines from the master cyl. to the combination valve, etc. So far everything has been perfect. I plan on finishing plumbing all the lines tomorrow so we will see, but so far they are top notch!

Thanks for the response!! Looks like I picked the right company for this conversion.