I have to replace the centerlink in my 70 chevelle w/ power steering and I was wondering what the torque specs were for the idler arm, pitman arm and tie rod nuts were? or do I just have to get the castle nut past the cotter pin holes? I'm just unclear on how tight to bolt these down. I am replacing the centerlink because the joint where the pitman arm bolts to the centerlink is very sloppy.

Thanks!

I think all the specs are in the pictures in the assembly manuals.

I don't have an assembly manual.

idler mounting bolts to frame 60 ft/lbs
pitman arm (big nut to steering box) 180 ft/lbs
35 ft/lbs on the rest, then whatever more you need to do to get the pins in. dont move it backwards.