I have a 69 chevelle, that I am tiring to upgrade the disc brake setup. What I was playing to do was go with a stock style rotor, that is slotted and drilled. With a 2" drop spindle and some 2 or 4 piston calipers. But I can't find any calipers that will work with the drop spindles, so I if want to want bigger calipers I have to use the stock spindles. But I want to use a tubular upper a arm, that wants a taller spindle?

My questions are do you know of any company that makes a 2 to 4 piston caliper that will bolt on to a chevelle stock brake assembly.

I have also heard of using a B-body ( Impala?) or G-body ( ?) brake setup, but a don't know the years to use.

I am currently use a Hotchkis lowering springs and sway bar setup, with a full poly urethane bushings. I would like if my car to sit about 2 inches lowers in the front. If you could help me my problem?
thanks adam
Lzybiker88@yahoo.com

Have you checked on fatman fab?

They sell upper and lower tube arms. I asked about these several years ago. I though they said they take "stock" spindals. Lots of gray hair now, could be way off.

Fatman Fab (http://www.fatmanfab.com/)

Enjoy