Horn Relay (Original, mounted on firewall)
Has 2 single wire connectors. I have one green and one black wire. Which one goes where? Black top-- green bottom?

Windshield wiper motor/pump. Looking at it from the front of the car...
Top portion (Pump) Has a 2 wire connector, with a dark blue and a black/yellow wire. Does this hook up Blue on left side? Does it matter?
Bottom Portion (Motor) Has a double and a single wire connector. Double connector Black wire and a Black/Yellow wire (Jumped from the pump). Single connector light blue wire. Does this hook up like stated above from left to right (Black:Black/yellow:Dark Blue)?

Thanks for your help! Bob :beers:

The connectors are keyed, should go on only one way. Here's a pic of the wiper wiring, no pic of the horn relay.

http://www.chevelles.com/showroom/data/500/70wprmtr.jpg

The wiper motor can be plugged into the wrong connetors. If it won't shut off by the switch after plugging it in and turning it on reverse the above wires.

Horn Relay (Original, mounted on firewall)
Has 2 single wire connectors. I have one green and one black wire. Which one goes where? Black top-- green bottom?

Bob,
On mine, the connector with the green wire goes on top and the black goes to the bottom of the horn relay. If you need a pic, I can get that for you. :)

Ethan

"The wiper motor can be plugged into the wrong connetors. If it won't shut off by the switch after plugging it in and turning it on reverse the above wires."

They are keyed, the molded plastic has a notch that corisponds with tangs on the metal connection tab. If not forced they will only go on one way.

"The wiper motor can be plugged into the wrong connetors. If it won't shut off by the switch after plugging it in and turning it on reverse the above wires."

They are keyed, the molded plastic has a notch that corisponds with tangs on the metal connection tab. If not forced they will only go on one way.

Trust me, it can happen. Ask me how I know.

Thanks Guys, much appreciated!


Bob,
On mine, the connector with the green wire goes on top and the black goes to the bottom of the horn relay. If you need a pic, I can get that for you. :)

Ethan

Ethan, I see now the the horn relay wires can only go one way into their designed spots. Thanks! :thumbsup:

"The wiper motor can be plugged into the wrong connetors. If it won't shut off by the switch after plugging it in and turning it on reverse the above wires."

They are keyed, the molded plastic has a notch that corisponds with tangs on the metal connection tab. If not forced they will only go on one way.

I see what your talking about. Notches and tabs. Thanks Elree, for the picture and information. :beers:

I used a Painless wiring harness and I hooked my wipers up and they worked about an inch then stopped. what a pain! I was thinking of buying a new motor but do you guys think I blew it?