my visors keep dropping down.i have new visor brackets and new plastic inserts but they still keep slowly dropping,i even tried wrappig some electrical tape around the inserts.i also tightened the bracket as tight as it will go.anybody run into this problem.

I had the same problem with my 69 El Camino. The problem is the, yes, once again, repro parts we're often forced to purchase. They don't close tight enough to hold the visor up. I found a nice used set. With the original set, the visors tightened right up. Problem solved. Send the repro's back and explain how crappy they are, and find an original set.

I installed a repro set yesterday. If I tighten them too much you can't move them at all so Id say mine fit properly.

Hank, if yours tightened up, there must be more than one type of repro out there. Where/when did you get them?

I have some Ground Up repops on teh '70 Elky that ighten up well, but have had some from Year One for an Impala that were loose. Box was plain white with their part # on it.

Hank eats his wheeties every day Bill:D

Hank eats his wheeties every day Bill:D

No but I get my daily allowance of beer! :D Visors came with a complete interior get from PUI. I know Legendary is the ultimate but so far I like the look and quality.

I had to send back the OPG brackets, and the NPD brackets fit and function great.

I also bought a set from Ground Up and they hold up well. The wind really tries to push them down once the top is down. I can tighten the scew enough that they won't even move.