Anybody know if I have to remove the door glass in order to remove the wing window frame assembly? Got everything loose, adjusters removed, but won't quite lift up high enough before getting hung up on something. Can't quite tell if I have to remove the main door glass and if so can it be taken out with the channel in place or does it have to be pulled from the channel?? 67 Convert. Thanks!!

Bob, the lower bracket is probably hanging up, you should have to turn the vent window assembly 90 degrees to clear the opening.
Best to remove door glass or remove lower stop and get window as far down as possible to make vent easier to remove. Good luck.

x2