I am looking for some durable and good replacement brake and gas lines for 69 chevelle. Here are a few specs, it has a 350 and upgraded front disk brakes and the rear still has drums. I would perer stainless for the brake lines, but if anyone has any suggestions I would appreciate them and if you dont mind, give me an idea what the $$$ is?

Ken. If your looking for something that will stay looking new, Go with the stainless. Otherwise, Don't waste your money. The OE lines will last for years especially in your area. You can get everything you need here.. Ground-up/brakes (http://www.ss396.com/mm5/merchant.mvc?Screen=CTGY&Store_Code=chevellecamino&Category_Code=BRAKES)
And your fuel lines here. Fuel lines (http://www.ss396.com/mm5/merchant.mvc?Screen=CTGY&Store_Code=chevellecamino&Category_Code=FUELLINES&sort=&list_all=1)

Thanks for the link Scott, I noticed that they only sell all drum or all power. You have an idea of which one is more applicable to my set up? Also, what is the best size fuel line / return line for a 69? Thanks for the info again

All, means all pieces for the front.. Not all 4 wheels..
If you have power frint disc. Use this. click (http://www.ss396.com/mm5/merchant.mvc?Screen=PROD&Store_Code=chevellecamino&Product_Code=CKT6903&Category_Code=BRAKELINESORIGINALSTEEL)..
Front to rear. click here (http://www.ss396.com/mm5/merchant.mvc?Screen=PROD&Store_Code=chevellecamino&Product_Code=CIN6815&Category_Code=BRAKELINESORIGINALSTEEL).
Rear axle click (http://www.ss396.com/mm5/merchant.mvc?Screen=PROD&Store_Code=chevellecamino&Product_Code=CRA6803&Category_Code=BRAKELINESORIGINALSTEEL)
Front flex. 2 needed click (http://www.ss396.com/mm5/merchant.mvc?Screen=PROD&Store_Code=chevellecamino&Product_Code=EBH-020&Category_Code=FLEXHOSE)
Rear frame to axle click (http://www.ss396.com/mm5/merchant.mvc?Screen=PROD&Store_Code=chevellecamino&Product_Code=EBH-06&Category_Code=FLEXHOSE)
You will also need various clips

These are what I used on my 69 and the only issue was the front to rear line needed minor "tweeking" to line up to the hole in the crossmember where it attaches to the rear flex hose.

Thanks Scott, u purchased each of those items right?