I have a 1971 chevelle and i am getting ready to replace the wiring harness(s) as for the rear lamp harness i was told the easiest way is to remove the rear bumper. I havent started anything yet but i was just looking at the bumper and was trying to figure out how it comes off. I saw 2 bolts behind the plate that i see need to be removed. 2 bolts at the bottom where the retangle holes are that need to be removed. Then i looked inside the trunk and saw 4 more bolts is that everything?

I have a 1971 chevelle and i am getting ready to replace the wiring harness(s) as for the rear lamp harness i was told the easiest way is to remove the rear bumper. I havent started anything yet but i was just looking at the bumper and was trying to figure out how it comes off. I saw 2 bolts behind the plate that i see need to be removed. 2 bolts at the bottom where the retangle holes are that need to be removed. Then i looked inside the trunk and saw 4 more bolts is that everything?the bumper is easy to remove. take off the lower valance.. there are bolts on both sides straight above the light housings us an extention and a 11/16 socket.. take them out. then open the trunk. there are 4 bolts that you remove there.. they are 5/8 now get a helper and pull down the licsence plate bracket. Remove the two bolts there with a 5/8 socket while someone holds the bumper. before pulling it all the way off remove the light sockets by twisting past the tabs. THE BRACKETS COME OFF WITH THE BUMBER. MARK ALL SHIMS THAT COME OUT.. THATS IT.

thanks for your help

thanks for your help
x2.