Buildsheet [Archive] - Chevelle Tech

: Buildsheet


hogman97
May 8th, 04, 6:24 PM
Where is the buildsheet for a 70' Malibu.
Thanks

elcamino
May 8th, 04, 7:59 PM
Somewhere in the car if one exists. Your job to figure out where.

NOTE
Build sheets (BS) were generated on the assembly lines to instruct the workers on what parts to install on the car. It is not a standard item to come with the car, its just happens the they were just starting to be used and were on a lot of items that were not run-of-the-mill parts for the cars. So if a BS was not in plain site it may have been left behind and covered over with trim. carpeting or whatever.

Some common place to find them are; attached to the inside of the door interior panels, under carpets, inside seats, inside headliner, inside body cavities, glued to inside of from fenders, under dash pad, on top of fuel tank. Basically look in places that would not have been uncovered since car was built. One other note, since every car had a lot of build sheets generated by every work station in the plant, you can find more than one or find one from another car because it happened to just get mixed in with all the other trash, stuck to workers shoes etc.

This should give you something to do for the rest of the year.

good luck smile.gif