I have an Air-Gap intake manifold bolted to 190 AFR heads, ...on my 385. How much manifold warpage is allowable? One side is less than .002", ... but the other is .007. Checked with a straight edge. Oil is still being sucked into the intake ports, with 2nd set of Felpro 1205's. I've checked intake/head mating angles also. I highly suspect .007 is too much, but I'm looking for an "experienced" opinion, to confirm. Thanks!

rustbucket79, ... I posted this before I saw your most recent reply to my earlier "manifold problems" posting. Thanks