i finally got the frame stripped, cleaned and epoxy primer. i have just a couple small areas to address before i paint it and then move on to putting the front end back together with all of the front suspension components then to the rear suspension. i already have the deluxe front suspension kit from Ground Up and i am looking for front disc conversion options. my question to TC is...

are there any good member pics of the front end being reassembled so that i can study them?

what should i be concentrating on in the mean time?

i need to replace the bushings in the rear control arms... are these the bushings i need?
http://www.ss396.com/mm5/merchant.mvc?Screen=PROD&Store_Code=chevellecamino&Product_Code=NMX-1600&Category_Code=CONTROLARMSREAR

i finally got the frame stripped, cleaned and epoxy primer. i have just a couple small areas to address before i paint it and then move on to putting the front end back together with all of the front suspension components then to the rear suspension. i already have the deluxe front suspension kit from Ground Up and i am looking for front disc conversion options. my question to TC is...

are there any good member pics of the front end being reassembled so that i can study them?

what should i be concentrating on in the mean time?

i need to replace the bushings in the rear control arms... are these the bushings i need?
http://www.ss396.com/mm5/merchant.mvc?Screen=PROD&Store_Code=chevellecamino&Product_Code=NMX-1600&Category_Code=CONTROLARMSREAR

Yes

thanks glenn.
i was a little confused because it doesn't state rear upper or lower and i wasn't sure if they were exactly the same or not.

thanks glenn.
i was a little confused because it doesn't state rear upper or lower and i wasn't sure if they were exactly the same or not.

Sorry for the short reply, I was in a hurry and did not want to keep you waiting. Here is some additional information

http://www.leverfamilysite.com/1964_Rear_Upper_Diff_Bushings.htm

Rear Uppers
Difference Between 10-Bolt and 12-Bolt Rear Upper Control Arms (http://www.leverfamilysite.com/Rear_Upper_10_12_bolt_Differences.htm)

How to Box Rear Upper Control Arms (http://www.leverfamilysite.com/Boxing_Rear_Upper_Control_Arms.htm)

Conversion of 10 bolt to 12 Bolt Upper Rear Control Arms (http://www.leverfamilysite.com/Create_12_Bolt_Arms_From_10_Bolt_Arms.htm)
Bushing hole center to center dimension (http://www.leverfamilysite.com/Rear_Control_Arm_Bushing_Dimensions.htm)
Differential bushings 1964 only (http://www.leverfamilysite.com/1964_Rear_Upper_Diff_Bushings.htm)


Rear Lowers
How to Box Rear Lower Rear Control Arms (http://www.leverfamilysite.com/Boxing_Lower_Control_Arms.htm)

Sway Bar Hole Spacing (http://www.leverfamilysite.com/Sway_Bar_Hole_Spacing.htm)
Bushing hole center to center dimension (http://www.leverfamilysite.com/Rear_Control_Arm_Bushing_Dimensions.htm)


Frame Braces
Photos of Late Style (68, 69, 70, 71, 72) Frame Brace Location. (http://www.leverfamilysite.com/Late_Style_Frame_Braces.htm)