Hey guys, im wanting to put an alluminum 20 gal fuel cell in my 71 chevelle. ne info on them would be appreciated (different brands, how theyre mounted, which to use for a street car, how to and what fuel lines to run). its just a sb 350 carb motor right now. Fuel injection later on...

I used a 16 gal. RCI from Summit. Summit Brand looked fine also.
Mine is bolted to the trunk floor. You can also make a frome in the trunk out of box tubing or whatever. If you use one with a sump, it will have to be covered if you ever go to the strip. Get one with the 90 ohm gm sensor and for street use I would get it without the foam.
As far as lines - run your preference in a min. of 3/8 line.
Hard line , pushlock, ss braided the fuel cell itself will have -an fittings you will have to adapt too. You will also need to run a piece of hose from one of the top vents to some place outside of the trunk.

Her is a link to a recent thread with some info and a search will turn up some pics also.


http://www.chevelles.com/forums/showthread.php?t=253431

Thanks guys, appreciate it!