2 15X10 draglites (EDIT< ARE THESE WELD DRAGLITES?) with 4.5 backspace one of them has a 3 inch long curb rash on the edge, nothing major that effects anything but there none the less. Mounted on them are ET DRAGS 30X9.0 with unknown amount of use (still can see the little tread holes). Metal valve stems

How can I tell how much life is left in them and what do you think they areworth complete as they sit?


Thanks!!

Tom

http://www.chevelles.com/showroom/data/500/medium/IMG_2550.JPG

http://www.chevelles.com/showroom/data/500/medium/IMG_25531.JPG

http://www.chevelles.com/showroom/data/500/medium/IMG_2552.JPG

May be interested sent you a pm

you still awake if i call. Only prob is I still don't know what $ to ask for them?

you know looking at these closer, are they weld draglite wheels? or are these knock offs? What is raising my suspensions is that all the pics of draglites I see have 10 holes lug holes. they don't feel heavy at like a cast wheel, how can i tell?

Thanks

Tom

you know looking at these closer, are they weld draglite wheels? or are these knock offs? What is raising my suspensions is that all the pics of draglites I see have 10 holes lug holes. they don't feel heavy at like a cast wheel, how can i tell?

Thanks

Tom
:confused:the welds i have say WELD stamped into the outside of the bolt pattern area.
the Crager SuperLites that look almost the same do not have markings,
i think some of the superlites were available without dual bolt patterns. :thumbsup:

ask $200-$275 as is ............

A buddy of mine had some 5x5 bolt pattern Draglites that did not have a dual bolt pattern. You may want to check the bolt pattern before you sell them!

they do not say weld anywhere. they are 5 4 3/4 bolt pattern

what you have is a set of old weld drag lites and if you remove the tires and measure they are probally a 9 inch wheel. when the wear hole on tire face is gone throw the tires away

$250 more or less depending on tire

what you have is a set of old weld drag lites and if you remove the tires and measure they are probally a 9 inch wheel. when the wear hole on tire face is gone throw the tires away

Thank you for that info. its very hard to measure the wheels with tires on it, but they seem like 9-10's ill try and do a little more precise measuring