Since you guys are real engine gurus...thought you could help. My friend needs a set of 327 small journal main cap bolts with extensions for factory windage tray. 1965 327 FI Corvette motor....any help on a source would be great.

send an email tom@lessismore.bz

thanks, wilma

A few years ago I got some from GM.

No problem as they are still available from the General. Part number 3872718 and they list for $17.83 each, you will need 5 if it's the same as the later small blocks. Shop around to beat that price, any GM dealer can get them for you, doesn't have to be a Chevy store.

Try gmpartsdirect http://www.gmpartsdirect.com/ . They have them listed at $13.52ea. I use them frequently, the prices are a fraction of what your local dealer parts dept charges.
By the way, there are THREE stud/bolts for Chevy windage trays:
1. Short SB-62/67 and will work for ANY small journal SB
2. Long SB-68 later SB with large journals
3. BB

You want the short one as already mentioned. If I remember correctly, the long SB version has already become discontinued.

Try gmpartsdirect http://www.gmpartsdirect.com/ . They have them listed at $13.52ea. I use them frequently, the prices are a fraction of what your local dealer parts dept charges.
By the way, there are THREE stud/bolts for Chevy windage trays:
1. Short SB-62/67 and will work for ANY small journal SB
2. Long SB-68 later SB with large journals
3. BB

You want the short one as already mentioned. If I remember correctly, the long SB version has already become discontinued.

Just bought the "other" studs for my project, they are part #14087508 and they are also still available.

Also try Scoggins Dickey Performance Chevrolet. I have found them to be cheaper than GMParts direct on both parts and handling charges.

Durand