|
jon_volk Nov 21st, 02, 8:42 PM 70 velle keeps stalling whenever i put it in gear..idles about 950..then put it in gear and it barley idles for a few seconds then dies...any suggestion? ------------------ 70 Chevelle 83 C10 Milan Nov 22nd, 02, 1:38 PM More info ! ------------------ 67 BB Prostreet Camaro COMBAT RAT 71 BB Chevelle (SS clone) 80 Camaro Z28 355 SBC 2002 35th anniv. SS Z28 tloleson Nov 22nd, 02, 3:59 PM 950 sounds a little high for a stock auto - I'd check for a vacuum leak first. Chaser77 Nov 22nd, 02, 8:42 PM i had the same problem maybe advance the timing a lil and adjust the mixtures lvl's i idle at 1k in park 600-700 in gear. ------------------ 72' Chevelle SS (Clone) TC Member#1417 CHELKAMINO Nov 22nd, 02, 10:00 PM What motor are you running??? Cam???? Duration??? Etc. Metalmechanic Nov 22nd, 02, 10:42 PM i'm with tloleson 950 is high and vacuum is low. Q-ship Nov 23rd, 02, 12:12 AM What size is engine, cam duration, torque converter, and what is the vacuum at 950. You will have to give alot more info for quality information, you don't want to chase your tail do you? jon_volk Nov 23rd, 02, 3:37 PM oops, sorry i was in a hurry and couldnt elaborate. Its a 350, not sure whats in it..sounds like the stock cam. Performer intake and edelbrock 600cfm carb. Stock torque converter, etc, etc. Ill check for a vacuum leak and also check the timing. Thanks. ------------------ 70 Chevelle 83 C10 Rick_Nelson Nov 25th, 02, 6:34 AM I just finished a '70 Yenko Deuce that could not get out of it's own way and even with Bias-Ply tires, it could not spin the 4:10 rear. All it was in that case was a bad convertor. Need more information to determine what your problem may be. ------------------ ACES #5032 TC #1074 | ||