I have a Blinker tach in my 67 that I want to take out and sell. What is the best way to go about getting it out.

Anyone?

I don't have a 67, but I would assume due to the location of the blinker tach, that you will need to lower the face of the dash. probably loosen the steering column and drop the face of the dash down to access the tach and harness. more time consuming than difficult. I have had the dash out of my 66 several times. but you can wait for an answer from a somebody with a 67.

Thanks, it seems like you could just reach up there with a wrench, but I can see where your coming from.....

Dropping the column we got, but where are the bolts that drop the dash? We could probably find them eventually, but hate to take a chance on tearing something up by trial and error!;)

Dropping the column we got, but where are the bolts that drop the dash? We could probably find them eventually, but hate to take a chance on tearing something up by trial and error!;)

should be two screws on the outside edges of the dash and a half dozen or so if you were to lay on your seat and look up at the dash. can't remember but there may be a couple bolts on the bottom at the front of the dash as well. Just take your time and don't try and force anything if it doesn't move freely. The chevelle dash is pretty easy. I had a hell of a time trying to figure out how half the stuff comes out of 1967 Buick Skylark GS dash one time.
That makes you appreciate how easy the chevelle dash is. ;)

Thanks for the help, everything went fine. All I need to do now is sell this tach!