I have a '69 with a Turbo 350. While in drive in doesn't shift into the next gear as I go faster. It stays in that same gear and just keeps revving higher and higher. I checked the fluid level but it is not low. Please tell me what I can do to fix this problem.

Start by making sure that your vacuum modulator is connected and has a vacuum signal.

No vacuum modulator = no shift

Ok-How do I do that? Where is it located. Kinda new at this as you can see.

it will be under ur car on the pass. side the modle is a round piece that is above ur pan but not to much above it, it will have a hose that connect to it from the back on ur intake manifold.

You called it. The vacuum line was disconnected from the modulator. I re-connected it and took her for a spin. To my delight, she was back to normal. Thanks for your help.