Any pics of chevelle 2 inch spring drop,will this drop with stock front end mess my allignment up,will i notice a big difference?Just starting out my pro touring attempt.

A 2" drop on one chevelle can vary in height from another chevelles 2" drop. These cars have have some many different springs (I6, SB, BB, A/C etc).

I would recomend you take a digital picture of your car and have someone photoshop(edit) it to lower the front a little bit. Also do a search on this forum.

You will need an alignmnet after a 2" drop.

Will you notice a differece??..... In ride quality....Usually depends on what rate of springs you get.

I don't know if this will help you but... My car has Fat Man 2" drop spindles and Year One drop coils all around. With all of that the front has a total drop of 3 1/2" and the back 3" the back. http://i103.photobucket.com/albums/m143/sg5492/IMG_2181.jpg

Perfect stance! How much ground to header clearance do you have?

I've got Hotchkis lowering springs all the way around with an extra 1/2 coil cut off of the front springs. Car doesn't look real low, due to the puney 14" wheels, but I've only got 3" between the headers and the ground!

http://i44.photobucket.com/albums/f9/graluc/Chevelle/Chevelle003.jpg

On header clearance just under 2 1/2" my cross member is the lowest part. A few weeks ago I hit the oil pan and put a hole in it. I'm looking in to Air Ride.

Do u have any problems with that front end set up? I have a tubbed 70 which sits really low in the rear so i hafta do something with the front (like at least 3 1/2 inch drop). When u read the blogs on here, many say to stay away from fat man and others say to stay away from cutting springs..im a novice at this and dont wanna learn from others who could save me time and money in testing parts..thx for any advice

I don't have any problems with the front end set up on my car (other than it is about 1 1/2 too low) Years ago I cut the springs on a Monte Carlo SS that was a big mistake. After a year all I had was problems out of it. When I did the back half on it I redid all the front end. Look in my sig for a pic of my Monte.

take a look at my car in my sig. thats 2.5 in the front and a little over 3 in the back...the ride is not to bad...but its not a cady either.....

take a look at my car in my sig. thats 2.5 in the front and a little over 3 in the back...the ride is not to bad...but its not a cady either.....

What springs do you have on?

thanks,

Just installed SPC springs from Mark at SC&C top notch guy with top notch service worth every penny spent. Give him a call, you won't regret it. Love the spirngs and the ride. Needed spacers to lift the front 1/2" but easy install. 20 min. per side.
CALL MARK!!!

the front ones are the originals and the back one are from CPP..no complaints at all!!