I was just making some progress getting my motor back together and I thought I'd share some pictures. I always enjoy looking at other peoples. ;) http://community.webshots.com/photo/85194855/288405322jOzzZw
http://community.webshots.com/photo/85194855/288406711HvMGma
http://community.webshots.com/photo/85194855/288407785kqdDRt
http://community.webshots.com/photo/85194855/288408639AIrToo

awesome work!

Nice, but,,, you want to mount a baffle or some kind of separator to cover the pcv or you are going to be pulling a LOT of oil out of the valley ;)

looks good, and different

Yeah I haven't gotten to the baffle part yet. I think I might end up drilling holes all the way through the intake and useing maybe 10/32" screws with a nut on them so that I can physically see that the bolts are still there and havent fallen into the lifter valley hehe. It'll just look kinda ugly having two nuts on top of the intake though. Or I could tig weld an alumnum baffle on! Hmmm, not sure what to do. Thanks for the compliments.

Hmmm, very......blue. graemlins/thumbsup.gif