Can HTH lower control arms be used with the SC&C Street-Comp Stage 2 - Plus ? On the HTH site they say they can be used w/ stock spindle, b-spindle, and f-body spindle, all for the chevelle. Are there different HTH arms for the spindles?

From HTH "The arms utilize a tall screw in lower ball joint that improves the camber curve, reduces bumpsteer and increases durability. We have moved spring centerline closer to balljoint centerline widening the spring track for increased roll resistance. " Since they use a tall lower ball joint, Is this the same method as the SC&C Stage2 wrt to the lower balljoint?

using a tall bj is just increasing the height of the spindle. why the hth arms? spc and speedtech both make good ones.

Tim

I found a frame for sale that already has the HTH arms (upper and lower) but I would rather have SC&C. To me its not worth it to buy the frame and swap over to SC&C and the AFX spindle (even thought thats what i really want). If i can use the HTH lower w/ the SC&C upper, than in my mind the frame becomes cost justifiable.

if its a good deal, id go for it. i wouldnt swap out what was already there. ill have to call hth and get some more info. they change the wheel rate, but they dont give a lot of other info on their site.