Ran 26x8.5 e.t. drags and measurements were faily close.Looking at trying hoosier QTP d.o.t. 27x10.5 and wondered if their dimensions advertised were close. Can not really go bigger than 27 at center and hoping maybe it is 26 at outer edge with 10.5" section width on 8.5" centerline.The 66 nova is very skimpy in wheelwell! Also not sure on using TUBE.Should weights be stuck on back with tape or epoxy? Was told it will not grow as much with tubes.Thanks much for any info or opinions!!!!!!!!! AL

I run Hoosier QT DOT Pro's...26 x 8.5x15 no tubes.
Measurements seem right on to me..a quick burnout with 20 lbs of air and the contact pattern measured a hair over 8"
They hook good too graemlins/thumbsup.gif