JAX SS
May 13th, 99, 8:47 AM
Can anyone send me the factory specs. for aligning the front end on a 66 chevelle with a 396.
|
Fred Aldrich May 13th, 99, 9:48 AM '66 Chevrolet Service Manual says: Caster - (SS & El Camino) neg. 1/2º ± 1/2º Caster - (All Other Models) neg. 1º ± 1/2º Camber - pos. 1/2º ± 1/2º Toe In - 1/8" to 1/4" ------------------ Fred Aldrich Web Site: www.GeoCities.com/~69_chevelle (http://www.GeoCities.com/~69_chevelle) Didge May 13th, 99, 10:23 AM Fred, is that for radial tires as well? I thought that radials needed to be aligned differently. I am asking to find out for myself as well. I would like to know the correct way for aligning radial tires. If these specs are correct, I need to file this post. Thanks Greg JAX SS May 13th, 99, 1:05 PM Thanks Fred. I appreciate the info. David Riley Fred Aldrich May 13th, 99, 5:37 PM IMHO, With radials, I'd start with these specs and perhaps all a little caster depending on whether the car tracked straight down the road or not. ------------------ Fred Aldrich Web Site: www.GeoCities.com/~69_chevelle (http://www.GeoCities.com/~69_chevelle) [This message has been edited by Fred Aldrich (edited 05-16-99).] | ||