|
198plus Nov 17th, 08, 9:07 PM Any suggestions for a good hydraulic cam for this 402 build ???? 30 over with 10.1 compression, Performer intake, 750 Holley, oval port heads, 700r trans, 2500 stall, and 411 gear. Its going in a 65 Chevy truck, thanks for suggestions badrad Nov 17th, 08, 10:38 PM The Isky mega 271/281 would go good for your set up. 1967chevelless396 Nov 18th, 08, 4:06 PM I'd love to see how the old UD/LUN302A7 would do in that engine but ground on a 110 lsa. I think the out-of-the-box specs are something like: 280/288 Adv. Dur. 223/230 Dur @ .050 .525/.550 lift 112 lsa, 106 centerline Chris (Mr. 4 speed) has one in his 454.......... Charles dreis454 Nov 18th, 08, 5:16 PM I'd love to see how the old UD/LUN302A7 would do in that engine but ground on a 110 lsa. I think the out-of-the-box specs are something like: 280/288 Adv. Dur. 223/230 Dur @ .050 .525/.550 lift 112 lsa, 106 centerline Chris (Mr. 4 speed) has one in his 454.......... Charles Or try the updated version of this cam...Lunati 60203 268/276 adv dur 227/233 Dur @ .050 .542/.554 lift 110 lsa works great in my low comp. 454 | ||