|
: Test Run racecar67 Nov 15th, 08, 4:48 PM I am installing the dash and do not have the battery or front wiring harnesses installed yet. I would like to see if all the dash lights work and also the heater blower. Is there a way to use a 12 volt power supply that i have to powerup the dsah? anychevy Nov 15th, 08, 8:56 PM I am installing the dash and do not have the battery or front wiring harnesses installed yet. I would like to see if all the dash lights work and also the heater blower. Is there a way to use a 12 volt power supply that i have to powerup the dsah? If the fusebox and all the internal wiring is connected, the dash mounted and grounded, you could try connecting the negative to a dash support for ground and the positive to the "BAT" terminal on the fusebox. I've never tried this, so I don't know if it will work or not. | ||