|
: cant find c clip bearing num on moser site ? victtor Oct 31st, 08, 1:19 AM HI have looked on moser website the dont show a part num for the bearing the you use with the 30 spline axles with c clip elim kit I have emailed them twice no luck thanks victtor rianbechtold Oct 31st, 08, 1:57 AM Go back to the other thread you started, there is a link to them. victtor Oct 31st, 08, 5:40 PM HI i did go onto that link checked out there list off bearings says nothing about bearings to fit the 30 spline elim kits have emailed them no reply thanks victtor Mike Oct 31st, 08, 5:59 PM Victtor , if you don't know the axle diameter your using ,neither do we. Heres the choices for the eliminator kits: http://www.moserengineering.com/Pages/C-Clip/eliminators.html There's 2 bearings listed for the c-clip eliminator: 9507S C-Clip Eliminator Bearing (1.398" ID) 9507M C-Clip Eliminator Bearing (1.533" ID) for #9333 eliminator The ID's listed would be your axle OD (diameter). http://www.moserengineering.com/Pages/Bearings/wheelbearings.html Pull an axle and measure it if you get no response from Moser. | ||