I want to see a pic of how your alternator brackets are mounted please :D

Go here for your pic. John
http://community.webshots.com/scripts/editPhotos.fcgi?action=showMyPhoto&albumID=98655458&photoID=105046165&security=SvEAtx

Ooop's, link didn't work for me??

Mine's not a Victor but is a Holley Strip Dom. and BB short W/P set-up..

I used a re-pop, stock alternator casting mount that I had to use my trusty 4.5" angle grinder on so that it just cleared my #1 header top flange, then used a spaced out TransDapt chrome stock top mount..

My belt doesn't line up all that well YET but I want to start her and see how they track before I get to tweeking too much..

Hope this helps..

pdq67

PS., forgot to mention that I am using my STOCK '67 L-48 motors single groove pulleys and clutch fan and a bolt-on SB P/S crank pulley.. My rebuilt cast-iron, stock W/P snout is drilled for both the SB and BB bolt pattern so can do this...

My P/S brackets are lower drivers side from Alan Grove Components too..

use this link. go to the 468.
http://community.webshots.com/user/bisqwik

Imp...? What are your brakcets from and can I see a close up of the bottom one :confused: :D :D

Go here. John
https://www.opgi.com/product.asp?ProdCode=SFL8501&topcatid=274&grpcode=27963&yearrange=&chapterid=675

I made my own.

http://www.wisconsinstreetdominators.com/forum/vbgarage.php?do=view&id=17

Knud. I bet that's a handful :D :D any pics of the lower bracket on yours??