I have some cracks in some duct pieces. And things like one of the retractable seat belt covers. I'm guessing that some of the ducts are ABS plastic?:confused: If that's the case, I know plumers use an ABS glue. But it's a thin liquid is there a thicker ABS glue? And the duct that goes to the windshield is the same material as the belt cover. What is that plastic and is there a glue for it?:confused:

I would use an epoxy like what POR sells for steering wheel repairs then sand, scuff and paint.

Or maybe something like this - http://www.eplastics.com/Plastic/ABS-Glue;jsessionid=0a0101431f43bc788b41ca1f49678a6bc6 dab1c35ddb.e3eTax4KaN0Le34Pa38Ta38Nax10

Lots of info and vendors for various plastic epoxies came up with a google search. I havent used anything yet because I have the POR stuff sitting on the shelf that im going to use to fill some problems in my dash.

Anyhow, just a thought for you.

Thanks for that link Beaux!:thumbsup::beers: