hello everyone, just thought i would post my current combination that im building right now.
468 .060 over
10.3.1 srp pistons
gm 049 heads fully ported and polished
2.19in 1.88 out
lunati/ultra solid roller 256/264 .660in .660out
will be installed on a 106 lsa part# 502a4lun
1-3/4 hooker headers
performer rpm manifold also have a team g open plane that i will test out also.
1050 holley dominator
8" art carr 4500 converter
4.56 gears
th-350.
i already have these parts so im just going to put everything together and see how it works out.
my other 468 that i have ran 10.39 @127.5 with a sixty foot of 1.45 on stock rear suspension. so the car should have no problem hooking.

i forgot to mention, what do you guys think about my combo?? thanks

Sounds like you got it nailed down right! graemlins/thumbsup.gif

Might end up wanting to lose some gear if it torques like it should. Put it together, we wanna see what it does too! :cool:

The exact same cam I'm running... graemlins/thumbsup.gif

i also have a set of ls6 rectangular port heads i might try after the ovals see if it will pick up any.i had a alot of work done to these heads they flow very well i have them on my other 13.1 468 with a comp solid roller .746in .710out 272/280 @.50 with a 5000 stall that went 10.39. so i will give them a try if i dont like the performance of the ovals.

i will let you guys know what this combo does in the 1/4 mile in about a month or two. thanks and have a great day smile.gif