hello again, more help needed,
i am getting ready to install my original front springs and noticed that one end of them is flat. does this end go towards the lower control arm or the upper. thanks in advance,gus.

The FLAT end of the spring fits into the UPPER (facing up) control arm.


Respectfully,
John R.

thanks!

Gus -

Don't forget that that your lower control arm spring pocket has two small holes that are used to position the end of the spring coil in the proper location. Position the spring end between the two holes.

rich, do you mean position the end of the spring between the 2 holes??

rich, i got it, right between the holes. i have to slow down when i'm reading. thanks again, gus.

He means between the 2 holes..............................