What is the stock jetting on the Demon 650 Mechanical double squirter? I have heard through another website that they ran 70 for the primary and 72 for the secondary. If you have rejetted your Demon can you explain what jet you with to and what was stock. I understand that different engines will like different jetting, so I will post my combo and hopefully one of you guys will have a similar set-up.

Combo
Demon 650 double squiter, mechanincal
Intake Edelbrock Air Gap RMP
Heads Ported w/1.6 full roller 2.02 76 cc (Stock Casting)
Cam CompetionCam 274 XE (dual pattern) installed on 106.
headers 1 5/8 Dynomax
Distributor MSD pro billet, forgot timing!
Gears 3.73 w/eaton Posi (10 bolt)
Transmission 700r4 performance billet parts
Stall PDQ 2400 (lock-up) converter

here is somemore info about the power range of the engine. I want to change my jets because I think she is running a little lean, so please look at the dyno sheet. I think I can make more power because when the engine was dyno, the shop made no modification to the jets whatesoever, only timing adjustments.

web page (http://www.sacchevelles.com/TC%20DYNO%20RESULTS.doc)

Here is the dyno result

Dyno sheet (http://www.sacchevelles.com/TC%20DYNO%20RESULTS.doc)