So I put in my new M&H wiring harness today. I did the entire car front to back. For some reason I do not have power at the fuze box right now. I think this is wierd because I have it at the horn relay and a couple of other spots under the hood. Does anyone have any thoughts? Thanks

Power should come from the horn relay to the bulkhead connector.
Could it be going into the engine side but not coming out of the cabin side of the bulkhead connector?

You might find this useful.... some years have minor errors but mostly good. (If that makes sense)

http://www.autozone.com/az/cds/en_us/0900823d/80/11/cc/b2/0900823d8011ccb2/repairInfoPages.htm