I pulled my 350 to do a cam, intake, and gaskets. The shortblock was in nice shape so I didnt touch it. The cam is a mild Lunati 301A5 UD grind to work with my stock components. I though the RPM AirGap would be to much but the car pulls harder everywhere. I also added a 650DP cause I know how to tune them. The centerforce DF also has a lighter pedal than stock and seems to grab nicely. Thanks to Steve at Lunati who took the time to discuss the best cam for my application.

Here are some pics of my updated page detailing the process.

http://www.cardomain.com/memberpage/467264/2

What CR are you running? Rear gears?

I'm curious, I was thinking of upgrading to the 272/272 myself in my 350.

Let me know how it runs in the 1/8mi or 1/4mi if you run it.

graemlins/thumbsup.gif

It should be about 8.5 to 1 comp ratio. The heads appear to be original 487's which are 76cc's. The Rear gear is 3.31. I will post strip results, im going wednesday night.

Sleeper that engine color looks good should be a sweet ride!