Me an my dad r trying to take off our dashboard off our 1967 chevelle is there any manuals or any help we can get to go it were just puting new bezels on an ss guages

You are going to want to drop the steering column (remove the firewall plate- 5-screws), I'd remove the steering wheel and/or the drivers seat (to give lots of room)...

there are 6+ screws along the top edge and 2 on the sides of the front...

Then underneath there are several 5/16" bolts (3+), probably remove the vent cables too... loosen the E-brake (remove bolts to dash) take off the lower column surround/cover and and the two nuts/bracket...

Once the column is down and bolts removed, you can rotate the dash forward and disconnect the harness/speedo cable and remove the guages...

1/4" socket/nutdriver works on most fasteners...

If you have a digital camera, take pictures so you can get it back together...

Really, its pretty easy, just time consuming...

ty funny thing is we decided to try that right before u sent us a reply but we only have have done half before we looked for a reply thanks for the other instructions