I would like to get a longer shifter stick to replace the Hurst stick I have now. It's in a console on a 67. I did not measure it yet, but it just seems too short.

Here's the comp plus shifter that i found on summit, but can't find the replacement stick?

http://store.summitracing.com/largeimage.asp?part=HUU-2916516&Prod=Hurst+Shifter+and+Installation+Kits&img=huu-2916516_w.jpg

Can someone take some measurements and post some pics of hurst shifter sticks.

I have a M20 4 speed.

Thanks much

That appears to be a Hurst 7236 12" stick.:)

I would like to get a longer shifter stick to replace the Hurst stick I have now. It's in a console on a 67. I did not measure it yet, but it just seems too short.

Here's the comp plus shifter that i found on summit, but can't find the replacement stick?

http://store.summitracing.com/largeimage.asp?part=HUU-2916516&Prod=Hurst+Shifter+and+Installation+Kits&img=huu-2916516_w.jpg

Can someone take some measurements and post some pics of hurst shifter sticks.

I have a M20 4 speed.

Thanks much

You can download a pdf file from the Hurst/BM web site that has all the different sticks with measurements.

You can download a pdf file from the Hurst/BM web site that has all the different sticks with measurements.

This is no longer true, I checked the web site and all the useful information and the old catalogs are toast. I have the older pdf file on my computer, if you would like it I can send it to you, need a good email address.

Thanks Wally. Please send it to dgilmore@keytronicems.com

Wally it is still there, they just changed the page.

Information-Diagrams (http://www.hurst-shifters.com/FAQ/Information-Diagrams)

HMM it seems they are not allowing direct linking. From the main page go to the FAQ then to information amd diagrams.

What Hurst stick do you have now? Should have the Hurst 7236 stick that is about 12 inches high with a bend at the top.