I have this buried in another post here but was asked to post it as a stand alone.

Some recommended tools:
Micrometers 1", 2-3" and 5"
Dial Bore Gauge 1" to 5" min
Good 1/2 torque wrench
0-1" dial indicator and magnetic base
fixture to measure piston to deck height. Will hold dial indicator above.
12" min cam degree wheel and crank snout turner for 1/2" socket.
good quality ring compressor for piston install
oil pump priming tool the one with collier.
Harmonic balance install/remover tool with real roller thrust bearing.
On the engine spring pressure tester.
Spring remover tool.
spring height micrometer.