ivanimal
Sep 6th, 08, 10:18 PM
Where do I find a posi 12 bolt in the Bay Area or better where should I look?
|
: Where do I find a posi 12 bolt Brian_d Sep 6th, 08, 11:29 PM craigs list, ebay, swapmeets, the recycler (if it runs up there), classifieds here. Good luck chevycrazed67 Sep 7th, 08, 2:49 AM Try GM sport salvage they are located in san jose ca. 408-432-8498 adress 1964 Old Oakland rd sanjose ca They are a bit pricy for a gm junk yard but they have a ton of rearends tdimasi Sep 7th, 08, 10:29 AM As wisely noted above, you just gotta keep looking for used ones or spend the big bucks at Currie. Another thought...while no one will dispute the advantages of a 12 Bolt, if you're not planning on bolting on a pair of sticky slicks and making regular trips to the strip, why not a 10 Bolt? ivanimal Sep 7th, 08, 4:09 PM The 10 bolt on it did not last 200 miles. It needs a 12 bolt. 509Merlin Sep 7th, 08, 8:19 PM How about a 9", cost me less than a 12 bolt. hurstL78 Sep 7th, 08, 8:43 PM In my personal opinion, I would buy a complete unit from Moser or someone like that. By the time you buy one, get new gears, new posi unit, or have yours redone, buy new axles new bearings and seals, then assemble it, you will have as much in it as if you just bought an aftermarket rear. And if you buy a new afteramrket rear it comes with a warranty. Build it yourself and if it breaks soon after it's yours :( Van ivanimal Sep 8th, 08, 10:12 AM How about a 9", cost me less than a 12 bolt. I want to add disc brakes will that impede the uniformity of buying a kit? ivanimal Sep 8th, 08, 10:13 AM In my personal opinion, I would buy a complete unit from Moser or someone like that. By the time you buy one, get new gears, new posi unit, or have yours redone, buy new axles new bearings and seals, then assemble it, you will have as much in it as if you just bought an aftermarket rear. And if you buy a new afteramrket rear it comes with a warranty. Build it yourself and if it breaks soon after it's yours :( Van What do these cost new? Aprox? ivanimal Sep 8th, 08, 3:08 PM How about a 9", cost me less than a 12 bolt. Is the pattern different on the lugs? Would a Disc brake kit be hard to find/install/be compatible with a chevelle kit? I told you I was green!:D 402blue71 Sep 8th, 08, 4:13 PM my friend has a 14 bolt with discs--posi/gear ratio unknown--old guy he bought it from said it stood up to a 400hp smallblock with no prob. is for sale. pm for more details. only prob its in indiana. derek rbwjr325 Sep 8th, 08, 4:17 PM T Lowe | ||