Hello, a buddy sell a new set of 7/16 1.7x Ford roller rockers; Can use them in my bb 454 ?
Thanks graemlins/waving.gif

Not an expert but from reading here I think you would have to check your current ratio rockers..if you're going from 1.5s to 1.7ish then you are going to have different geometry and if you don't compensate for it I think you can do some damage.

the bb rockers has 1.7 ratio

No,you will NOT be able to use Ford roller rockers on a BBC

Thanks mr 4 speed .
Somebody use Scorpion roller rockers, are made in USA, any comment about (The Bill Mitchell HARDCORES crate engines use them)

Scorpions are Excellent Rockers

I just picked up a set of Scorpion Rockers from www.competitionproducts.com (http://www.competitionproducts.com) (they are 2 miles form my house so I literally picked them up) for less than $200 and they are too pretty so I think I'll have to leave them out to look at for a while, I was looking at the Gold Crane Race rockers but I am glad I went with the Scorpions and now I have money left for more mods!