can anyone help with this the square threaded nuts on the support how do i remove the ones that are bad and do the sell replacement ones.:confused:

When you say bad... do you mean the threads?

yes the threads are rusty real bad on some of them.:confused:

Can you run a tap through the threads to clean them up?

I thought of that but some of them are to far gone but the rad support itself is in good shape can they be removed or are they part of the support.:confused:

Why not drill them out to the next largest size and make new threads?

If not the nuts are normally just spot welded to the support on a corner or two, although I could be wrong.
Just grind away the nut and spot weld a new one in place...Eric

if i do that where do i get replacement ones from i asked ausleys on monday and they dont have them.:confused:

Try your local hardware store, look at McCarr or what ever that large supply store is called.

They are out there you just need to look for them...Eric

thank you.:thumbsup: