Body (66) has been in metal for a few months-kids, metal work,etc. Both lower quarters needed patch panels, and the area behind rear window and sail panels replaced/fabricated. Now it's covered in Rage-Extreme filler, blocked out. I was going to prime the entire shell with Dupont self-etching primer, Chromapremier CF 22860-S. 2 medium coats.

The question is, will Slicksand stick to the Chromapremier self-etching primer? I heard that Slicksand doesn't stick well to bare metal spots. I have bought a 2.0 gun off EBay, and plan to spray the shell's quarters and top with the slicksand and guide coat it and block it out till perfect. Thanks.

I've have never had a problem with slicksand not sticking to bare-metal. :D

Your 2.0 primer gun will do the job. :thumbsup:

www.howardsbackyardautobody.com :beers:

Poly primer(slick sand) is not meant to be applied over self etching primer, the two products can react causing the poly primer to lose adhesion and fall off.

Personally I spray the car with 2 coats of epoxy primer then topcoat it with your slick sand.

sevt chevelle- What king of Epoxy primer do you recommend, exactly??

sic-"kind"

Personally I like spoxy from SPI
www.southernpolyurethanes.com

I also hear good things about the NASON epoxy which is duponts cheaper paint line.