Revs Hi
Dec 30th, 04, 3:57 PM
I'm ready to order a solid roller for my BB 427 for my 66 Chevelle Pro Street project. This car is a seldom driven street car and using good fuel isn't a problem...that said here's my combo:
LS7 Block
ZL1 TRW 12.1 Forged pistons( Valve notching needed?)
Forged crank and rods- ARP fasteners
AFR 305 heads CNC chambers
Weiand Stealth intake
Holley HP950 (AED mod.)
4.11 Gears
3800+ Stall Converter
Isky Red Zone Lifters
RPM Range 3000 to 7000
I want to use a UDHarold/Lunati grind. Costom grind is OK if that's what will work best. Here's my list of cams I like:
Lunati 502A5 255/264 685/680 108 or 110 LSA
Custom Grind 266/272 678/688 108 or 110 LSA
" " 264/264 660/660 108 OR 110 LSA
I want a hard hitting power, so I'm leaning toward a 108LSA??? I want a mean idle with good midrange power. I want I need some opinions!!! Hopefully Harold will stop by!! Thanks!! Cary
LS7 Block
ZL1 TRW 12.1 Forged pistons( Valve notching needed?)
Forged crank and rods- ARP fasteners
AFR 305 heads CNC chambers
Weiand Stealth intake
Holley HP950 (AED mod.)
4.11 Gears
3800+ Stall Converter
Isky Red Zone Lifters
RPM Range 3000 to 7000
I want to use a UDHarold/Lunati grind. Costom grind is OK if that's what will work best. Here's my list of cams I like:
Lunati 502A5 255/264 685/680 108 or 110 LSA
Custom Grind 266/272 678/688 108 or 110 LSA
" " 264/264 660/660 108 OR 110 LSA
I want a hard hitting power, so I'm leaning toward a 108LSA??? I want a mean idle with good midrange power. I want I need some opinions!!! Hopefully Harold will stop by!! Thanks!! Cary