I don't have any nuts guys. :D My centerlines require the shank style nuts and I will be needing another set to run Loaders slicks. I am just running stock size studs. 7/16" I think? So if anyone could bring me a spare set that would be much appreciated.

Thanks! :beers:

Hey Dave, you avaliable Friday...l:)l:)l:)l:)l:)

Mine are WAYYYY to big.:yes:

I think I got some Brett.

Really, do they need to be the opened kind?

I figured you guys couldnt crack tooo many jokes if I just came out and made the joke myself. :rolleyes:

I am going to go through tech with street tires so opened or closed doesnt much matter. Thanks Dave, love you. ;)

Your lugnuts ARE the best. Thanks Dave, love you. ;)
:eek::eek::eek::eek::eek:

so whats the deal with lug nuts and slicks? I'm running the ones i use on my street tires. I never read anything about lug nuts on the website for tech. Please edumacate me

Wheel studs are suppose to engage at least their diameter into the hex portion of the lug nut. This is mandatory on all types of tires but they don't check to close if you are only running true streets ;).

(the other)Greg

Wheel studs are suppose to engage at least their diameter into the hex portion of the lug nut. This is mandatory on all types of tires but they don't check to close if you are only running true streets ;).

(the other)Greg

ah ok I should be fine, the studs stick out a least an 1" of the rims my slicks are on.

Brett,
Do your Centerlines take the .480" shank or the 1.30" longer style shank?

Brett,
Do your Centerlines take the .480" shank or the 1.30" longer style shank?

They are the .480" shank. I already have lugnuts for those, they are my street wheels. I am going to be using Mike's slicks so I dont think the nuts will work as they are steelies.

I found My old deep set acorn lugs. I'll bring them.

Thanks Dave! I owe you big for lending me your nuts... :eek:

I have both deep acorn nuts and the Weld Wheel shank style in 7/16 already in the trunk in case anybody comes short. The acorns are closed but I think they could be opened up with a little persuasion.

If you're running drag radials the tech dude never said a word to me and mine are closed. Slicks might be different. (yes I know I'm gone but I did run there in April, remember)

You should be fine with the closed ones, they are MT ET Street drag radials.

And I already went through tech, if I had to do it again I would just do it on my street tires then change them for the slicks.

And I already went through tech, if I had to do it again I would just do it on my street tires then change them for the slicks.

That's exactly what I'm doing.

Last time thorugh tech the guy didnt even open the hood or look under the car... I guess he was just to busy looking at the cool blue 66:D

I guess he was just to busy looking at the cool blue 66:D

Oh did Mike66SSFan drive by? :D

Oh did Mike66SSFan drive by? :D

l:)l:)l:) Thats a good one Brett... Hey we need to line up the Berg built motors:yes:

I got them loaded.:thumbsup: